Description
DC-GSX140241 (Condenser)
The Direct Comfort DC-GSZ14 14 SEER Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 14 SEER rating, the DC-GSZ14 will help reduce energy consumption throughout the life of the system.
Standard Features
- R-410A chlorine-free refrigerant
- High-efficiency scroll compressor
- SmartShift® technology to ensure quiet reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Copper tube/enhanced aluminum fin coil
- Fully charged for 15’ of tubing length
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
DC-CAPF3636B (Evaporator Coil)
The Direct Comfort DC-CAPF Cased Upflow/Downflow Indoor Coils are made for split system air conditioners and heat pumps. The coil’s cabinet is painted Architectural Gray.
Standard Features
- Suitable for use with R-410A and R-22 refrigerants
- Rust-proof, high-temperature, thermoplastic drain pans feature a low water-retention design
- Available with check flowrater expansion device for heat pump or cooling-only applications
- Rifled tubing and corrugated aluminum fin coils
- Foil-faced insulation
Cabinet Features
- High-quality post-paint cabinet
- Split-seam front for easy access
DC-GMS80603AN (Furnace)
The Direct Comfort DC-GMS80603AN is a 1.5-3 ton single-stage, multi-speed gas furnace with a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. This means you get comfort and cost savings from this energy saving furnace. You set the multi-speed motor to operate at the level most comfortable for you and your home. This furnace has a rating of up to 80% AFUE (Annual Fuel Utilization Efficiency), meaning that 80 cents of every dollar of heating energy expense heats your home, compared to some older central heating systems which can be rated at only 60% AFUE.
Furnace Features
- Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit.
- Corrosion-resistant, aluminized-steel tubular furnace heat exchanger
- Furnace is designed for multi-position installation – Goodman GMS8: upflow, horizontal right or left; Goodman GDS8: dedicated downflow
- Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life
- Aluminized steel inshot gas furnace burners
- Energy-saving PSC, multi-speed, direct drive blower motor
- Quiet, corrosion-resistant induced draft furnace blower assembly
- Integrated Goodman furnace control with diagnostics
- Low voltage terminal blocks
- Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
- 40VA transformer for heating and air conditioning control service
- Combination redundant gas valve and regulator
- A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
- Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
- Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
- Attractive architectural gray paint finish
- Heater’s foil-face insulation lines the heat exchanger compartment
- Coil and furnace fit flush for easy installation
- Convenient left or right connection for gas and electric service
- Bottom or side air inlet (Goodman GMS8)
- Removable, solid-bottom block off
Dimensions
Condenser: W26″ x D26″ x H27 1/2″
Cased Coil: W17 1/2″ x D21″ x H22″
Furnace: W14″ x D28″ x H38 3/8″
